Technical specifications
Geometry
| Measurement | Small | Medium | Large | XL |
|---|---|---|---|---|
| Rider Height | 5'1"-5'6" | 5'5"-5'10" | 5'9"-6'1" | 6'0"-6'4" |
| Effective Top Tube Length | 588mm | 606mm | 627mm | 651mm |
| Seat Tube Length | 415mm | 425mm | 445mm | 475mm |
| Seat Tube Angle | 76°/71° | 76.5°/71.5° | 77°/71.5° | 77.5°/71.5° |
| Chain Stay Length | 440mm | 441mm | 442mm | 444mm |
| Bottom Bracket Drop | 29/11mm | 29/11mm | 29/11mm | 29/11mm |
| Bottom Bracket Height | 348mm | 348mm | 348mm | 348mm |
| Head Tube Angle | 64° | 64° | 64° | 64° |
| Wheel Base | 1211mm | 1237mm | 1266mm | 1301mm |
| Head Tube Length | 90mm | 95mm | 103mm | 114mm |
| Axle to Crown | 586mm | 586mm | 586mm | 586mm |
| Fork Offset | 44mm | 44mm | 44mm | 44mm |
| Trail | 136mm | 136mm | 136mm | 136mm |
| Stack | 622mm | 628mm | 635mm | 645mm |
| Reach | 433mm | 455mm | 480mm | 508mm |
Frame Specs
Wheel Size |
MX - 29"/27.5" |
Front Travel |
170mm |
Rear Travel |
165mm |
Shock Spec |
230mm X 65mm |
Axles |
177x12x1.0 |
Seatpost Diameter |
31.6mm |
Max Seatpost Insertion Depth |
SM 260mm, MD 270mm<br> |
Rear Brake |
200mm post mount/223mm max rotor size |
Rear Tire Clearance |
27.5” x 26 ” |
Crank Mount |
ISIS |
Max Chainring |
36T Round / 34T Oval |
Tapered Headtube |
ZS44 upper / ZS56 Lower |
Colors/Size |
Cashflow Green / TK-421 White<br>S / M / L / XL |
Suspension
Support
The ReRun is a Class 1 eMTB
Class 1: eBikes that are pedal-assist only, with no throttle, and have a maximum assisted speed of 20 mph.
Class 2: eBikes that also have a maximum speed of 20 mph, but are throttle-assisted.
Class 3: eBikes that are pedal-assist only, with no throttle, and a maximum assisted speed of 28 mph.
Yes, The Bosch Performance Line SX motor is part of the Bosch Smart System. This includes all other Bosch components on the bike like the battery, mini remote, and system controller display
Yes all sizes are designed to use MX wheelsets meaning a 29" front wheel and 27.5" rear wheel
The shock size is 230x65mm. The mounting hardware is 25x8mm
Yes, the ReRun can fit coil shocks and large air can shocks like the Rockshox Vivid Air and the Fox X2 Air.
No you cannot as the ReRun frame was designed specifically for a 165mm travel shock. Changing this will void the warranty.
The ReRun is designed to perform optimally with its stock headset configuration. We have not tested it with angle-adjustable headsets, so we can’t guarantee proper fit or performance with those setups. Please note that installing an angle-adjustable headset will void the frame the frame warranty
The ReRun is designed to fit 32-36t round chainrings. 36T (round) max for all sizes
The ReRun incudes a chainguide that is specifically designed for and direct mounts to the frame
The ReRun is designed with a 170mm fork with a 596mm axle to crown length. The ReRun is compatible with a 180mm fork that does not exceed a 596mm axle to crown
Yes, as long as the axle to crown measurement does not exceed 596mm
The Bosch SX motor on the ReRun will offer assistance up to 20mph (32kph) for North American markets.
We use the DT Swiss rim magnet that can be found inside the tire attached to the bead of the rim using the valve.
The Bosch CPT400 battery is an integrated type battery that is mounted into the downtube of the ReRun. Removal of the drive unit is required to remove the battery from the frame
Yes the Bosch PowerMore 250 range extender is available for purchase from your local bike shop. This will add 62.5% more watt hours bringing the total capcity to 600Wh
All Bosch products have a 2-year warranty
We use a 400 Wh battery offering a rated continuous output of 250w and a max power output of 600w. The Performance Line SX motor give you 340% support!
It offers 55Nm of torque at only 4.4 pounds in weight, the lightest drive unit in the Bosch range. Designed for lighter eMTBs, this motor line is designed for a mid-power experience but still offers peak assistance and power that rivals the heavier systems.
Yes!
| Torque Specifications | |
|---|---|
| REAR UDH HANGER | 25 Nm |
| Pivot #1 | 15 Nm |
| Pivot #2 | 15 Nm |
| Pivot #3 | 15 Nm |
| Pivot #4(COLLECT AXEL) | 15 Nm |
| Pivot #4(COLLECT WEDGE) | 12 Nm |
| Pivot #5 | 15 Nm |
| REAR SHOCK BOLT | 15 Nm |
| FORWARD SHOCK BOLT | 10 Nm |
| REAL AXLE | 13 Nm |
REQUIRED TOOLS FOR BASIC SERVICE
» Torque Wrench
» 1x 4mm Hex Key
» 1x 5mm Hex Key
» 1x 6mm Hex Key
» 1x 8mm Hex Key
» Anti-Seize Compound
» Grease
» Bearing Puller (Slide Hammer) - 15mm
» Bearing Press
» Bearing Puller
» 15mm ID Bearing Drift Set

